LightpathLED Tabletop Gen3: Specifications, Price and Verdict
Database record · last reviewed August 2026
FDA status: FDA-registered (Class II); markets in clinical terms.
| Wavelengths | 670nm, 810nm, 940nm |
|---|---|
| Wavelength allocation | ~66% NIR |
| LEDs | 114 |
| LED type | dual-chip ('double chipped' per brand comparison table; a site FAQ says 'triple-chip' - brand statements conflict) |
| Irradiance (brand) | 76 mW/cm² at 12 in (not comparable to 6-in figures) |
| Panel size | 14x12x3in |
| Beam angle | 30 degrees |
| Modes | 3 light modes (red only, NIR only, red+NIR) on Gen3 panels; 10 pulsing presets plus manual pulsing control 1-9,999Hz (Titan/Gen3); Diesel Mini pulses at 2.5/10/40Hz |
| Stand | Diesel Gen3 and Diesel XL Gen3 currently include a free floor stand ($174 value promo); Titan includes an electric stand; other mounts/stands sold separately |
| Trial | 60 days |
| Restocking fee | Diesel/Combo/iLED lines: no restocking fee. Pro/Budget/Torch lines: 20% restocking fee. |
| Warranty | 5 (Gen3 and Titan panels; Diesel Mini 2, torches/portables 1) |
| FDA status | FDA-registered (Class II); markets in clinical terms. |
| Price | $924 verified 2026-08-13 |
Irradiance in context
Measurement note: Method not named by brand; independent spectrometer measured a Diesel at 56 vs advertised ~76 mW/cm2 Because it carries surface reds (670nm) alongside deeper near-infrared (810nm, 940nm), it can serve skin-level sessions and deeper muscle or joint work alike. Put your actual distance and this figure into the dose calculator to land inside a studied 10 to 60 J/cm² range; when the number is method-unstated or solar-meter based, work from roughly half of it.
What stands out
- 60-day trial window
- irradiance is stated from spectrometer measurement
What to check before buying
- dual-chip LEDs split each diode's power between two wavelengths
- returns can carry a fee: diesel/combo/iled lines: no restocking fee. pro/budget/torch lines: 20% restocking fee.
- a stand costs extra
Alternatives at a similar price
Frequently asked questions
Is the LightpathLED Tabletop Gen3 FDA approved?
No home red light therapy panel is FDA approved. Its regulatory position per the brand: FDA-registered (Class II); markets in clinical terms. Registration is a listing, not a clearance.
What wavelengths does the LightpathLED Tabletop Gen3 use?
670nm, 810nm, 940nm
What does the LightpathLED Tabletop Gen3 cost?
It is priced at $924 per the last verification. Prices change; confirm on the brand site.
Sources: manufacturer specifications via manufacturer site (2026-08-13 research); third-party measurement data where noted is attributed inline. Spec fields marked "not published" or "not verified" reflect gaps in the brand's public data, not omissions in ours. Report a correction via the contact page.